China Glaze Nail Lacquer, Boho Blues
How to get it
-
-
China Glaze Nail Lacquer, Boho Blues
1.00 EACH, 0.15 lbs. Item # 642459
This soft indigo blue will have you doin' anything but singin' the blues. China Glaze Nail Lacquer with Hardeners is a professional - level nail enamel made with a special balance of polymers and resins that combine to create a nail lacquer that is long lasting, chip - resistant and resistant to color and shine fading. Will not thicken in the bottle, no thinners necessary. Our New Brush is a Stroke of Genius. 36% more fibers. Amplified holding power with maximum precision and control. More coverage in fewer brush strokes. China Glaze Nail Lacquer is a high-quality nail polish brand known for its extensive range of vibrant colors and finishes.
The nail lacquer offers richly pigmented shades that provide excellent color payoff with just one coat.
China Glaze Nail Lacquer has a smooth and easy-to-apply formula that glides onto the nails evenly.
The nail lacquer offers richly pigmented shades that provide excellent color payoff with just one coat.
China Glaze Nail Lacquer has a smooth and easy-to-apply formula that glides onto the nails evenly.
Butyl Acetate, Ethyl Acetate, Nitrocellulose, Acetyl Tributyl Citrate, Adipic Acid / Neopentyl Glycol / Trimellitic Anhydride Copolymer, Isopropyl Alcohol, Adipic Acid/Fumaric Acid/Tricyclodecane Dimethanol Copolymer, Stearalkonium Hectorite, Sucrose Acetate Isobutyrate, Trimethyl Pentanyl Diisobutyrate, Stearalkonium Bentonite, Diacetone Alcohol, Citric Acid, Dimethicone, Kaolin, Polyethylene Terephthalate, Polyurethane-33, Polyester-3, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, Alumina, Silica, Tin Oxide, Aluminum Hydroxide, Synthetic Fluorphlogopite, Polyoxymethylene Melamine, Ethylhexyl Hydroxystearate, Aluminum Calcium Sodium Silicate, Barium Sulfate, Hydrolyzed Keratin, Water (Aqua, Eau), Calcium Pantothenate, Mica MAY CONTAIN: Aluminum Powder (CI 77000), Bismuth Oxychloride (CI 77163), Black 2 (CI 77266), Blue 1 (CI 42090), Carmine (CI 75470), Chromium Hydroxide Green (CI77289), Chromium Oxide Greens (CI77288), Ext. Violet 2 (CI 60730), Ferric Ammonium Ferrocyanide (CI 77510), Ferric Ferrocyanide (CI 77510), Green 3 (CI 42053), Green 5 (CI 61570), Green 6 (CI 61565), Iron Oxides (CI 77491), Iron Oxides (CI 77492), Iron Oxides (CI 77499), Manganese Violet (CI77742), Orange 4 Lake (CI15510), Orange 5 (CI 45370), Red 4 (CI 14700), Red 6 (CI 15850), Red 7 (CI 15850), Red 17 (CI 26100), Red 21 (CI 45380), Red 22 (CI 45380), Red 27 (CI45410), Red 28 (CI 45410), Red 30 (CI73360), Red 33 (CI 17200), Red 34 (CI 15880), Red 40 (CI 16035), Silver (CI 77820), Titanium Dioxide (CI 77891), Ultramarines (CI 77007), Violet 2 (CI 60725), Yellow 5 (CI 19140), Yellow 5 Lake (CI 19140), Yellow 6 (CI 15985), Yellow 7 (CI45350), Yellow 8 (CI 45350), Yellow 10 (CI 47005), Yellow 11 (CI 47000)
See directions below. Apply Strong Adhesion Base coat to all 10 nails. Roll polish between your palms back and forth for 30 seconds to mix color. To prevent applying too thick, remove excess from the stem and brush, by wiping brush on the sides of the bottle neck.
Hold brush at a slight angle above nail for 2 seconds, allowing nail polish to travel down to the tip of the brush. Touch the polish down in the center of the nail, slightly away from the cuticle.
Gently push the brush up towards the cuticle, right below the base line and gently glide down nail towards the free edge in a single straight swipe motion.
Lift the brush and repeat on each side of the nail plate, following the same single swipe motion to cover the length of the nail.
Apply 1st coat of polish to all 10 nails. Apply second coat of polish in the same process Seal the free edge of the nail by running the brush along the tip of the nail plate to ensure longer. Wait 2 minutes to apply Fast Forward Top Coat.
This will insure the last layer is completely dry and will not create streaks when applying the top coat. Post Tips: Detail the surrounding skin with a cuticle stick and polish remover if color gets on the skin.
Allow Top Coat to dry completely prior to applying cuticle oil to condition the cuticles and nails
Hold brush at a slight angle above nail for 2 seconds, allowing nail polish to travel down to the tip of the brush. Touch the polish down in the center of the nail, slightly away from the cuticle.
Gently push the brush up towards the cuticle, right below the base line and gently glide down nail towards the free edge in a single straight swipe motion.
Lift the brush and repeat on each side of the nail plate, following the same single swipe motion to cover the length of the nail.
Apply 1st coat of polish to all 10 nails. Apply second coat of polish in the same process Seal the free edge of the nail by running the brush along the tip of the nail plate to ensure longer. Wait 2 minutes to apply Fast Forward Top Coat.
This will insure the last layer is completely dry and will not create streaks when applying the top coat. Post Tips: Detail the surrounding skin with a cuticle stick and polish remover if color gets on the skin.
Allow Top Coat to dry completely prior to applying cuticle oil to condition the cuticles and nails
WARNING: Keep out of reach of children. External Use Only. Keep off skin. CAUTION: FLAMMABLE. Avoid heat or flame.
Color | Blue |
---|---|
Form | Liquid |
Product type | Nail polish |
Quantity | Single pack |
From China Glaze
Additional resources
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.